RH15E03XW-A

Fully assembled and configured; just add a Futaba S-FHSS transmitter or Spektrum DSM2/DSMX Tx/ Sat RxJR DSM2/DSMJ/DMSS satellite receiver and transmitter, then you are ready to fly. An integrated control system with specially optimized 3-axis gyro, receiver, electronic speed controller.

RH15E03XW-A

Fully CNC machined metal CCPM 150 swashplate features superior rigidity and zero slop, All metal DFC main rotor head assembly featuring high end aesthetic and superior flight performance Brushless motors used in main and tail rotors; paired with 2S 7.4V 250mA battery, the unimaginable power will surprise your senses.

 
RH15E03XW-A

4g digital micro servos are special design for T-REX 150 DFC, features to increase micro helicopter control speed and precision, let the micro/indoor helicopter has same flight performance as large/outdoor helicopter.

RH15E03XW-A

The new extension tail rotor can provide excellent tail lock performance whether it's in general or extreme 3D flights!

 
RH15E03XW-A

Equipped dual output function, it allows two batteries charging with 1A current in the same time. Balance charging is good to prevent the situation of over-charging or under-charging for a single cell. Auto-detected charge status display. The auto-detected function of low voltage for power storage. Reverse polarity protection and short circuit protection.

RH15E03XW-A

Brand new 150 carry box is special design for T-REX 150 helicopter, features easy to carry and storage, this attractive small box can be storage a helicopter and its necessary flying parts which included 6 batteries, 3 hexagon screw drivers, 2 pair main blades, charger and a small parts box, you can easy and clear to know inside situation just need a glance at its transparence cove.

 

Standard equipment

150 Main Blades-Black
150 Main Blades-White
150M Main Motor x 1
150M Tail Motor x 1
DS155 Digital Servo x 1
DS150 Digital Servo x 2
150 Tail Blades x 1
150 Bind Plug x 1
150 Remote Extension x 1
7.4V 250mAh/30C x 2
RH15E03XW-A

Specification

Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Weight (w/o Battery): 53g

Accessories

T-REX 150 DFC set x 1
Main Blades x 2 set
Tail Blades x 1 set
150M Main Motor x 1
150M Tail Motor x 1
DS155 Digital Servo x 1
DS150 Digital Servo x 2
Bind Plug x 1
Remote Extension x 1
7.4V Li-Po 250mAh Li-Polymer Battery x 2
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw driver(Blue/8.2g) x 2
0.9mm Hexagon screw driver(Red/8g) x 1
Parts box E x 1(78.5x60.9x21mm)
Parts box A x 1(52x40x12mm)
CH150X Li-Po Charger x 1


Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS Tx/Sat Rxor Spektrum DSM2/DSMX 2.4GHz Tx/Sat Rx.