 |
【Specification:】
(1).Input Voltage：DC11.5~13.5V
(2).Input Current：1500 mAh
(3).Single battery full voltage：4.2V±0.05V
(4).Minimum chargeable battery voltage: 1.25V (the
charger will indicate that there no battery if
single cell voltage lower than this parameter)
(5).The restoration time of defective battery: 3
MIN (If restoration still can not be finished when
overtime, indicate that the battery has been
damaged)
(6).Practicable charge current: 750 mAh
(7).Compatible chargeable battery: 11.1V
1000mAh；7.4V 800mAh Li-Polymer battery
(8).Final Voltage: 8.4 ±0.1V 2 cells ; 12.6V ±0.1V
3cells
|
|
|
|
| 【Charge
process:】 |
1.Connect the charger with
power, then the
red power indicator lights up, which indicates that the power
connection is normal.
2.Connect the 2 cells or 3cells Li-polymer battery with
charging ports of charger respectively or
simultaneously, then the green charging indicator flashes and
it indicates the battery is on charge.
3.Green indicator stops flashes shows that the battery is
full. |
|
|
Charging Precautions：
1.After connecting the power, the red indicator would get
light, otherwise, it indicates that power connection goes
wrong. (fig 1)
2.Green indicator would flash after connecting the battery with
charger, which indicates that battery is on charge. If green and
red indicators flash simultaneously, it indicates the error with
battery, please check whether the battery has been damaged.
If green indicator goes out and red indicator flashes, it shows
that the charger is under protection mode, please disconnect the
power for 3 seconds and switch the power on again.
3.Green indicator gets constant light after the charge
finished. If the battery has not been unplugged for a long time
after charge finished, the battery would be recharged when single
battery voltage is lower than 4.15V after self
discharge. Also, this procedure will circulate, make sure the
battery is in saturated state. (fig 2)
4.Keep it away from children and take
the battery out from the helicopter while charging.
5.Fire or serious injury would be resulted in under certain
conditions so please follow the instructions and never leave
equipment unattended while charging.
6.Keep the battery charged in cool and ventilating place and be
away from heat source, flammable and exposable materials.
7.To ensure secure and quick charging, please use ESKY original
chargers.
|
|
|
|
