3in1 Battery Meter/Balancer/Discharger LCDSuitable for 2-6 lipo or Li-fe batteries
The
Voltage Meter
balancer/Discharger is designed for Li-Po and Li-Fe batteries. It can measure
battery voltage precisely and balance each cells voltage of a battery pack or
discharge batteries in preparation for storage.
The balance function can be
executed before or after the battery has been charged. I also can be done during
the battery charging process, helping to ensure that the battery pack remains in
excellent condition.
You can observe each cells' voltage in the battery pack
individually. This helps identify abnormal or falling cells during the charging
or discharging process.
Dimensions
93.5 x 60 x 17mm
Voltage
Limits
Balance ports LiPo - LiFe 2-6 cells
Receiver
slot 1.2v - 8.5v
Voltage power supply
7.4v - 11.1v JST
port
Discharge / Balance current
450mAh @ 4.2v
Discharge
Voltage lower limit per cell
User adjustable between 2.00v and 4.00v (pre-set
at 3.90v)
Balance Voltage Lower Limit per cell
User adjustable between
2.50v and 4.20v (pre-set at 3.30v)
Balance connections
JST-XH
