This motor is a thrust machine intended for speed 400 gear drives. Drawing 12-15 Amps. It can also run as direct drive (with small props) taking advantage of the 2150Kv speed. Runs on 2-3 cell lipo packs. On a 3 cell it will turn a 6 x 3 prop at 20,000 rpm. Perfect for an insane park jet or very respectable wing.

This motor performs great geared in a GWS speed 400 gear box. 3:1 or 3.9:1 seem to be the best ratio for this one. That allows it to be great fit for any stick mount application. Provides over 30 oz. of thrust with the correct gear prop combo (see data below). Direct drive with 5" to 6" props for fast jet or wing (see videos)..

Motor comes with AXI mount for direct drive and screws to fit in to any GWS type speed 400 gear box. Mounting holes are 16mm (or roughly 5/8 in.). Does not come with bullet type connectors to plug to the ESC.

Aside form the awesome performance of this line of motors. They are extremely user friendly.

This is a type A motor. Meaning the shaft is removable So you can swap from pusher jet or wing to your favorite puller application. No more press fitting a shaft or buying a new bell if your shaft breaks. Simply loosen 2 screws and the shaft pulls out for easy replacement or mounting configuration. Made with high temp and high RPM bearings, and high temp magnets good beyond 180 degrees. Also the first I have seen in the industry the stator is now double bonded to the housing. Keeps the stator from moving when crashed during high amp draw situations 

With the 2.3mm shaft a pinion from a GWS 400 gear box will slide right on and secured with a dab of lock tight. No press fitting pinions and bending shatfs. The gear box allows easy manipulation of the motor to fit the speed, torque, and amp draw needed for your application. We also stock shafts, gear boxes, and apc props. Motor also accepts and is available with 3.0mm shafts. And any 3mm shaft can be used as a replacement.