New 2.4G Spread Spectrum technology allows the transmitter and receiver to be
'locked-on' to the same frequency ensuring much improved reliability and peace
of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more
responsive control, when compared to a standard frequency system. Third,
Operating at 2.4 Gigahertz also puts the radio control out of the frequency
range of any 'noise' caed by the other electronic components on your helicopter
- such as the motor, speed controller and any metal to metal noise - eliminating
interference and glitching that can affect traditional frequency system. Fourth,
another main characteristic of 2.4 Gigahertz equipment from a RC model club’s
point of view is that no frequency control is needed. Eliminating the need to
check everyone else's channel numbers, prior to flying. No more worries about
turning up at a club with the wrong crystal in your Tx.
This Brand New 2.4 GHZ Digital 6 Channel all Aluminum Black Hawk 450 SE RTF
is a Complete RC Helicopter ready to Fly and is 3D ready! Powerful 3500KV
Brushless Motor, 35A Brushless ESC, Professional Head Lock Gyro, High Capacity
11.1V 1800mAh 15C Li-Po Battery, 2.4 GHZ Digital 6CH Radio & Receiver, Aluminum
and Fiberglass combined to create this ultimate helicopter! Complete Ball
Bearings and Belt Driven Tail give you the reliability you want, and the
confidence you need! All the options of the T-Rex SE for much less!
Feature:
6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down
& Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
New 6 channel 2.4 GHZ Digital Transmitter with PIT/PLT mode lock switch and
adjustable knob
High quality CNC aluminum alloy rotor head & tail set
High rigidity aluminum tail boom
Reinforced maximum durability fiberglass main frame
State of the art components such 3500KV Brushless Motor, Sensorless 30amp
Speed Control, and 1800mAh 15C 11.1 Volt Li-Po Battery Pack
All the options of the T-Rex SE for much less!
NOR collective pitch structure make perfect 3D maneuvers such as roll,
inverted, and swoop flights
Plenty of power and head speed for sport flying and aerobatics
Professional individual head lock gyro
Reliable gear system
Accurate tail pitch control system
Tail servo mount for accurate rudder control
High intensity stainless steel shaft
120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the
helicopter and weight is greatly reduced
CCPM mode with adjustable pitch system and 3D conversion
Tail rotor driven by belt transmission system provide stable flight and low
noise
Mode lock switch to free lock the parameters of PIT & PLT
Main rotor driven by powerful Brushless Motor
NO TAIL Motor - Tail rotor driven by main motor with servo controlled rudder
like gas helicopters
No need to worry about burning tail motors
Tail blade adopt flameout landing system
Bell-heller mixing greatly increase the sensitive of the whole helicopter,
which provide good aerobatic responds
Improved blades give superior lift. Their pop off design gives extra
protection in case of heavy landing
Perfect for people who wants to move up from 4ch helicopter
PCM receiving and transmitting system increases the operation stability
Improved battery support that holds the battery firmly, and can also be
adjusted to suit your balance of flying
Almost Unbreakable Rotor Head
Weight is a key to a EP helicopter, lightened skid set, main gear, main
frame and canopy reduce the load of whole helicopter
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos can be
mounted solidly by screw and easy to install
Extreme smooth control and stable flight
Precise controlling and hovering
Can fly in skyway, backward, and 3D aerobatic
Suitable for Outdoor/Backyard/Stadium
Using the Ultra tough Aluminum Alloy and Carbon Fiber materials, the
Helicopter does have very strong structure
Approximately 15 minutes flight time on each charge - Optional Li- poly
battery will help to achieve better performance and longer flight time.
All spare parts and accessories are available
Complete Kit, Ready to Fly (Everything is included and 100% assembled --
only required 8 AA batteries for the transmitter to start flying)
Specification:
Main Rotor Diameter: 680mm (26.75 inch)
Tail Rotor Diameter: 154mm (6 inch)
Overall Length: 820mm (32.25 inch)
Height: 228mm (9 inch)
Width: 121mm (4.75 inch)
Flying Weight: 530g (Battery included)
Drive system: 3500KV Brushless Motor
Servo: 4X 9g
Gyro: Professional Headlock Gyro
ESC: 30A Brushless Speed Controller
Battery: 11.1V 1800mAh 15C Li-Po
Control system: 2.4 GHZ Digital 6CH CCPM Multifunctional Transmitter and
Receiver
Radio Control Range: 2500 feet (762m)
Package
Include:
Helicopter (100% Assembled)
2.4 GHZ Digital 6 Channel Multifunctional R/C Transmitter
