2.4GHz BlueRay 450PE 3D RC Helicopter

"The MOST AWESOME 3D Radio Controlled Helicopter! FULLY-LOADED 2.4GHz"

The BlueRay 450PE a fully loaded version 2.4GHz PREMIUM EDITION CCPM 3D RC helicopter, 100% built, Ready-to-Fly!  Light and fast, this new machine from Exceed RC has everything you ever wanted.  The BlueRay 450 Premium Edition Helicopter is an advanced rc helicopter designed with the most updated current technology available and produced with the highest quality CNC machining. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the BlueRay450 PE is designed with the best features available while eliminating all the weak points from the current T-REX SE.  All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings.

 

What is 2.4Ghz Technology?
New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club’s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx.

• 100% Ready-to-Fly 6 Channel 2.4GHz R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)

• New CNC/Composite Fiber Super Frame; only 1.2 mm, improve the rigidity and perfect for 3D flying.

• High quality CNC aluminum alloy rotor head & tail set

• CNC Main Blade Grips
  CNC Main Rotor Hub

• CNC Washout Set

• CNC Swashplate

• CNC Tail Push Rod Support End w/ Carbon Fiber Rods

• CNC Tail Servo Mount

• CNC Horizontal Fin Holder

• CNC Tail Gear Case

• CNC Tail Pitch Lever

• CNC Tail Rotor System

• SuperFrame CNC Parts

• High rigidity/Strong aluminum tail boom

• CCPM version, new aluminum parts for prompt, precision actions.

• High Quality A-Graded 325mm Carbon Fiber Blades

• Upgraded Powerful Alpha Brushless Motor 3500KV

• Volcano 30A Electronic Speed Controllers

• Professional Head-Lock Gyro

• New longer 3K battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, and can adjust the center of gravity according to the weight of battery, it reduces the correction when the heli rolling.

• Rigid CNC aluminum rotor head for precision and smooth movements.

• Tail rotor hub made of stainless steel, very rigid.

• Use 35pcs precision bearing.

• Great stable and sensitive mixing lever design! Can display the great stability and precision for 3D flight.

• Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

• Using new Main rotor holder with thrust bearing and 4mm Feathering shaft, features smooth rotation and stability under high rotation speed.

• Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.

• New c.g. amended tail blades feature streamlined and quick, make the gyro more efficient.

• Tail rotor control set with dual bearing, features CNC control piece and smooth structure design, get smooth pitch travel.

• Providing fly bar weight- When normal flying, you can add the weights on fly bar paddles for stable flight. When aerobatic flying, you don't need to add the weight, but you can see the flexibility of 3D actions.

• CNC tail pulley assembly and tail holder are using high rigid aluminum alloy, features wear resistant and falling resistance.

• New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safety.

• Using new high strength ball links and stainless steel linkage balls on the whole unit, feature wear resistance, anti-oxidization.