[ Home > Select by Size > 400 Size RC Helicopters (RTF) > Most Stable 6-Channel Heli! Exceed-RC G2-V2 6-Channel Type Z400 Belt-Driven Electric RC Radio Remote Control Helicopter Ready to Fly w/ LiPoly Battery ]
Most Stable 6-Channel Heli! Exceed-RC G2-V2 6-Channel Type Z400 Belt-Driven Electric RC Radio Remote Control Helicopter Ready to Fly w/ LiPoly Battery
3D aerobatic capable 400 class size RC
electric 6 channel 3D RTF helicopter, the Exceed-RC G2! READY TO FLY!
The Exceed-RC G2 is ready to fly out of the box within minutes. Everything needed
to fly is included and installed such as a battery pack, motor, electronic and a
6 channel 72Mhz FM radio system. All that is needed are 8 "AA" batteries for the
transmitter. Plus, each Exceed-RC G2 is test-flown at the factory to ensure precise
performance and control which makes it truly ready to fly right from the box.
We
are also proud to offer this magnificent model as 3D capable right out of
the box. Combining the knowledge of RC nitro collective precision along with
the most advanced micro electric design concepts, we have arrived at a model
that excels prepared to wipe out the competition. The Exceed-RC G2 Type 400 (Now
in Version 2) offers collective pitch control that will let helicopter
pilots to fly in almost any direction. Transitioning from forward flight to
hover with smooth, solid control is a cinch and negative pitch is a breeze
for aerobatics like loops and rolls.
We are also proud to offer this magnificent model as 3D capable right out of the
box. Combining the knowledge of RC nitro collective precision along with the
most advanced micro electric design concepts, we have arrived at a model that
excels prepared to wipe out the competition. The Exceed-RC G2 offers collective
pitch control that will let helicopter pilots to fly in almost any direction.
Transitioning from forward flight to hover with smooth, solid control is a cinch
and negative pitch is a breeze for aerobatics like loops and rolls.
The installed mixing board controls mixing of the main and tail rotors. The
board also contains speed controls, a external gyro for tail stabilizing and a
BEC circuit that supplies power to the receiver and servos
3D conversion and alterable
pitch system provides solid and smooth control
Pre-built Exceed-RC G2 400 size RC Helicopter, zero assembly time, Ready to
fly out of the box
6 channel FM 72Mhz multifunctional transmitter with 3D conversion. PIT and
PLT adjusting knob
Belt Driven Tail Rotor System
One-way bearing system. Flameout landing system
3-in-1 receiver unit (mixer, motor controller, receiver), High Quality
External electric gyro
Computer Simulation Cable included (Computer simulation software not
included)
English User Manual
Main Rotor Diameter:
630 MM
24.8 inch
Tail Rotor Diameter:
145 MM
5.7 inch
Overall Length:
610 MM
24 inch
Overall Height:
195 MM
7.7 inch
All-up Weight:
580g (battery included)
20 ounce
Battery:
Lithium Polymer Battery
Power:
380SD carbon brush motor
Servo:
4 x 9g
Pitch Control:
rubber, alieron, elevator and
throttle, 3D conversion and alterable pitch system
Radio System:
6 Channel FM 72Mhz, include a
pair of interchangeable crystal
Charger:
Quick 110V wall charger
Computer Simulation:
Serial simulation cable
(software not included)
fda
Expect only the best as you experience tight, precise control and quick response
as the Exceed-RC G2 will dazzle you with agility and speed. Using the basics of
micro electric design to keep components light and durable while distributing
heat away from electronic, the Exceed-RC G2 is not only precise, but also
efficient. When you combine precision and efficiency and add beauty, you will
arrive at the Exceed-RC G2: The Ultimate Super-Micro Electric Helicopter.
