The ALL-New 2.4GHz EC130 HUNTER from Esky is completely assembled in the factory and 100% Ready-to-Fly out of the Box!. Electronic system has been completely adjusted by our top engineer before packing, no adjustment is needed. Simply charge the battery and you're ready to fly! You will be amazed at how easy it is to fly a 4-channel radio controlled helicopter. Standard outfit include: a 100% RTF chopper, a transmitter, a set of charger, main blade, longer flight lipo battery, a ESKY softdog software and a Instructional Video CD for computer.

Watch the Hunter in Action!   ?@ Products Description:   Co-axial Counter-rotating double blades system Easy to fly with simple operation,designed for beginner Ready to fly out of box Digital servo with precise movements and sensitive reaction, efficient in control Simple structure of landing skid ensures convenient adjustment and maintenance 2.4G remote control system adopts Advanced Spread Spectrum technology and digital FSK (Frequency Shift Key) coding technology. This combined with two digital servos, ensures rapid response, precise control and nimbler movement. With this system, several flyers can operate simultaneously within the same area, ensuring a safe and fun flying experience. Specification:   Main rotor diameter: 340mm Tail blade diameter: 130mm Length: 415mm Height: 174mm Width: 77mm Weight: about 216g Power system:180 motor x 2 100% Ready-to-Fly 2.4Ghz Transmitter:4 CH (including training switch and simulator port) Mix controller:4 in 1 controller (W/gyro, mixer, ESC, receiver); Servo: Digital servos;weight:7.5g;torque:1.0kg.CM;speed:0.1S/60? Battery:7.4V 800mAh Li-polymer battery. Package included :   ESky Hunter Helicopter Body (Ready-to-Fly) Transmitter 4ch @ 2.4Ghz 7.4V Li-polymer Battery (EK1-0181) Charger for 7.4V and 11.1V Li-polymer battery (EK2-0851) 1 x 110V AC Switching Adapter 12V DC Connector to Charger Quick Start Guide and Manual in English & Simplified Chinese Gift box Extra! 2 Sets of Spare Blades (Upper & Lower) Extra! EK2-0900A USB Cable + FlightSIM CD-ROM ?@ Starting balance and stability in the balance hammer design. Four in One controller (included : gyroscope, mixer control, speed controller, the receiver) Chromatic flashing course light. LiPo Battery ?@   ?@

?@

The Esky Chinook is a cool looking tandem rotor semi-scale RC helicopter designed to give absolute newcomers and sport pilots great RC model helicopter flying! Up until now, tandem rotor helicopters were considered hugely expensive and difficult to fly so were strictly for experts. Amazingly the Esky Chinook is super easy to hover than normal helicopters - the two coaxial rotor systems working together has to be flown to be believed! The Chinook is sturdy and full of features to improve survivability! When you do crash we will have spares to get you back in the air. Remember that model helicopters are demanding to fly and you will need to train carefully.

Installation tips on using the PC program for the 6 Channel 2.4Ghz Tx with the Blueray RTF heli

T6 manual link

A few tips:
 

1. Follow the video to install the driver and run it for the first time.
2. Make sure it's communicating and click GETUSER BEFORE you make any changes.
3. Save your settings to a default file so you can come back to it.
4. Do not keep saving the same file name, you want to be able to revert back to a previous file if you mess something up. Name them incrementally Blueray1, Blueray2, etc.
5. My default file is particular to MY helicopter, Your Endpoints and Subtrims are likely to be different.

Suggestions for changes over the defaults:

 

1. Change the Endpoint values for Ch4 to -60 and + 60. This will turn down the Piro rate of the Tail.
2. Change the AFR for Ch6 (Pitch) to -60 to reduce total pitch range to +/-9. Check and set this with a pitch gauge.
3. Change AFR for Ch5 (Gyro Gain) to 80 initially so you don't get so much gain you get a bad tail wag. Gyro should hold pretty well w/ a max gain of 80 initially. 

T6config Install CD Files (Right click Save As)
Default T6config file for Blueray PE/SE (Right click Save As)
Defaluts (Blueray) in Text format (to manually enter)

Genesis T6Config file (Right click Save As)

If you are having trouble installing Drivers, try this:
 

• Prolific Driver site
• Vista Drivers Link at cooldrives
• Find the file ser2pl.sys on the internet and install in to the Windows\system32 folder
• Google "Vista prolific driver" 
• Some people have had to copy the files from the CD to their desktop in order for them to install. 

Driver and install video:

This is the newest fully loaded 2.4G Exceed-RC Blazing Star ready-to-fly (RTF) rc helicopter with aluminum & metal upgrades and very little plastic parts. Everything you need to fly out of the box is included. To begin, you just got to get the battery charging right away. This 4-channel helicopter is designed with two sets of main rotors and a freewheeling tail rotor that does not affect flight. The contra-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the dual blade setup provides more gyroscopic stability. In plain English: you look much better on the stick than you thought you would. On close inspection of the main rotor unit, you will notice that the lower rotor provides cyclic control for the ship. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the Exceed-RC Blazing Star turning in the direction opposite to the rotation of the faster moving rotor. The new Blazing Star is powerful, flies longer and has better servo resolution for more precision flying indoors and outdoors. It is also super easy to fly and spot landing on the kitchen table or other platform presents an entertaining challenge. You will also be impressed with its stability!

The new Blazing Star has the rate adjustment and gyro adjustment pots right on the side of the control board, allowing you to make the helicopter more responsive in slightly windy conditions. It also lets more experienced pilots tune the ship to their liking. The Exceed-RC Blazing Star ships with the rate and gyro pots at the low setting for maximum stability on initial flights. Keep in mind the aim of the Exceed-RC Blazing Star is an entertaining R/C helicopter that allows beginners to get into the hobby inexpensively and experienced pilots to add a "leisure" ship to their stable at an extremely reasonable price.

The Exceed-RC Blazing Star comes with a 4-channel, 2.4Ghz , 7.4V 1250mAh lithium-polymer battery pack, charger. The transmitter has two features worthy of note. On the front there is a color battery meter which makes it easy to tell when it is time to replace the alkaline batteries. On the back, there are open dip switches for non-standard helicopter flyers to alter the configuration of the radio to a style they are accustomed to using.

Feature:

• Improved 2.4ghz version! This is the new 2.4ghz version with a lot of adjustment and improvements.
• Design of metal swash plate and metal rotor head is of legerity, innovation, precise and stability
• Coaxial structure effectively offers stable flight and easy operation.
• New 2.4 GHz Spread Spectrum Transmitter, Awesome Look Cabin, Reliable Spread Spectrum Mixer/Gyro Control, More Stable Flight, Even First Timer can Control Easily
• New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
• New Precise CNC-machined metal rotor head provides more operation accuracy
• New Compact swashplate structure with light-fine fuselage for super stable flight
• The combination of prompt servos ensures various flight courses
• It is possible to adjust the servo extent and the sensitivity of built-in gyro. Customized fine adjustment makes your flight more perfect
• 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE)
• New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily
• Powerful 2 x 370SH carbon brush motors
• More stable flight, even first timer can control easily
• SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Dual counter rotating rotor which eliminates the need for a tail rotor
• Reliable high quality mixer with built-in gyro board
• Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult.
• Precise controlling and hovering
• Factory Pre- assembled, zero assembly time
• Dual counter rotating rotor which eliminates the need for a tail rotor
• Rudder is controlled using variation in speed of each level of the rotor blade
• High Quality mixer + gyro board built-in
• Newly Designed Rotor Head gives better control
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Park
• Powered by 1250mAh Li-polymer battery. Longer flight time.
• The main rotor blades are using top quality composite materials, which is not easily break
• Approximately 12 minutes flight time on each charge
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

Specification:

• Main Rotor Diameter (Upper/Lower): 450mm (17.7 inch)
• Overall Length: 440 mm (17.3 inch)
• All-up Weight: 355g (with battery)
• Driven System: 2X 370SH Carbon Brush Motor
• Servo: 2X 8.5g Servos (speed 0.11sec/60?4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5X11.5X24mm) and inside Gyro
• Battery: 7.4V 1250mAh Li-polymer
• Charger: Exceed-RC GA-003 Lithium battery Charger
• Control System: 4 CH FM Multifunctional Transmitter and 3-in-1 Receiver (RX-406)
• Radio Control Range: 2500 feet (762m)

Package Include:

• Helicopter (100% Assembled)
• 4 Channel Multifunctional FM R/C Transmitter
• Wall Li-Po Battery Balance Charger (GA-003)
• High Quality 7.4V 1250mAh Li-polymer Rechargeable Battery
• English Manual

This is the newest fully loaded 2.4G Exceed-RC Blazing Star ready-to-fly (RTF) rc helicopter LCD Transmitter with aluminum metal upgrades and very little plastic parts. Everything you need to fly out of the box is included. To begin, you just got to get the battery charging right away. This 4-channel helicopter is designed with two sets of main rotors and a freewheeling tail rotor that does not affect flight. The contra-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the dual blade setup provides more gyroscopic stability. In plain English: you look much better on the stick than you thought you would. On close inspection of the main rotor unit, you will notice that the lower rotor provides cyclic control for the ship. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the Exceed-RC Blazing Star turning in the direction opposite to the rotation of the faster moving rotor. The new Blazing Star is powerful, flies longer and has better servo resolution for more precision flying indoors and outdoors. It is also super easy to fly and spot landing on the kitchen table or other platform presents an entertaining challenge. You will also be impressed with its stability!

The new Blazing Star has the rate adjustment and gyro adjustment pots right on the side of the control board, allowing you to make the helicopter more responsive in slightly windy conditions. It also lets more experienced pilots tune the ship to their liking. The Exceed-RC Blazing Star ships with the rate and gyro pots at the low setting for maximum stability on initial flights. Keep in mind the aim of the Exceed-RC Blazing Star is an entertaining R/C helicopter that allows beginners to get into the hobby inexpensively and experienced pilots to add a "leisure" ship to their stable at an extremely reasonable price.

The Exceed-RC Blazing Star comes with a 4-channel 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
, 7.4V 1250mAh lithium-polymer battery pack, charger. The transmitter has two features worthy of note. On the front there is a color battery meter which makes it easy to tell when it is time to replace the alkaline batteries. On the back, there are open dip switches for non-standard helicopter flyers to alter the configuration of the radio to a style they are accustomed to using.

Feature:

• Improved 2.4ghz version! This is the new 2.4ghz version with a lot of adjustment and improvements.
• Design of metal swash plate and metal rotor head is of legerity, innovation, precise and stability
• Coaxial structure effectively offers stable flight and easy operation.
• New 2.4 GHz Spread Spectrum Transmitter, Awesome Look Cabin, Reliable Spread Spectrum Mixer/Gyro Control, More Stable Flight, Even First Timer can Control Easily
• New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
• New Precise CNC-machined metal rotor head provides more operation accuracy
• New Compact swashplate structure with light-fine fuselage for super stable flight
• The combination of prompt servos ensures various flight courses
• It is possible to adjust the servo extent and the sensitivity of built-in gyro. Customized fine adjustment makes your flight more perfect
• 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE)
• New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily
• Powerful 2 x 370SH carbon brush motors
• More stable flight, even first timer can control easily
• SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Dual counter rotating rotor which eliminates the need for a tail rotor
• Reliable high quality mixer with built-in gyro board
• Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult.
• Precise controlling and hovering
• Factory Pre- assembled, zero assembly time
• Dual counter rotating rotor which eliminates the need for a tail rotor
• Rudder is controlled using variation in speed of each level of the rotor blade
• High Quality mixer + gyro board built-in
• Newly Designed Rotor Head gives better control
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Park
• Powered by 1250mAh Li-polymer battery. Longer flight time.
• The main rotor blades are using top quality composite materials, which is not easily break
• Approximately 12 minutes flight time on each charge
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

Specification:

• Main Rotor Diameter (Upper/Lower): 450mm (17.7 inch)
• Overall Length: 440 mm (17.3 inch)
• All-up Weight: 355g (with battery)
• Driven System: 2X 370SH Carbon Brush Motor
• Servo: 2X 8.5g Servos (speed 0.11sec/60?4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5X11.5X24mm) and inside Gyro
• Battery: 7.4V 1250mAh Li-polymer
• Charger: Exceed-RC GA-003 Lithium battery Charger
• Control System: 4 CH FM Multifunctional Transmitter and 3-in-1 Receiver (RX-406)
• Radio Control Range: 2500 feet (762m)

Package Include:

• Helicopter (100% Assembled)
• 4 Channel 2.4 GHz Spread Spectrum Multifunctional R/C LCD Transmitter
• Wall Li-Po Battery Balance Charger (GA-003)
• High Quality 7.4V 1250mAh Li-polymer Rechargeable Battery
• English Manual

TTR4710-F06M2A1 Thunder Tiger E325 Super Combo 2.4Ghz RC Helicopter

Detailed Description

Overview 3D Performance + 2.4GHz Radio System = 100% Thrills The mini Titan E325 super combo is a ready-to-fly 3D helicopter package combining the advanced SkyMaster TS6 2.4GHz 6-CH radio system and iFHSS technology.From radio system to electronic speed control, high-performance brushless motor and servos, all the best is included. Go fly and experience 100% thrills     Features    ? iFHSS 2.4G Radio System     ? Super strong and lightweight one-piece main frame     ? One-piece molded landing skid     ? Easily accessible and removable motor to change pinions     ? High-positioned battery tray for crisp aerobatics     ? Changeable Bell-Hiller mixing ratio for different flying styles     ? 120 degree ECCPM control system     ? Main rotor grips with 2 radial and a thrust bearing.     ? Full autorotation system     ? Entire tail assembly detaches for easy transportation and storing     ? Precise tail pitch control system   Mini Tiitan E325 2.4G Super Combo includes:    ? E325 2.4G Super Combo with new scheme canopy, main wood blades.    ? ACE RC TS6 Radio system (TS6 transmitter + TRS601DD 6ch 2.4 G receiver)    ? Li-Po battery & Transmitter battery    ? Instrucion Manual     ? Quick Start Guide    ? ACE RC T3AC Li-Po charger & Transmitter charger (except New Zealand & Australia editon)   ACE RC TS6 - iFHSS 2.4G radio system transfers from Innovator ACE RC TRS601DD 2.4G receiver OBL 29/35-10H Brushless Motor ATG-6100M Gyro + E-CCPM Mixer C0915 Micro Rudder Servo C1016 Micro Servos BLC-40 Brushless Speed Controller Li-Po Battery, 3S1P/220 mAh, 25C T3AC Balance Li-Po Charger   Specifications     ? Full Length of Fuselage(mm / in.): 25.74" (654mm)      ? Full Width of Fuselage(mm / in.): 4.72" (120mm)      ? Total Height(mm / in.): 8.3" (210mm)      ? Main Rotor Dia(mm / in.): 28.66"(728mm)/Max.29.45"(748mm)      ? Tail Rotor Dia(mm / in.): 6.14" (156mm)      ? Gear Ratio: 1:10:4.4/1:11.5:4.4/1:15:4.4      ? Full Equipped Weight(g/ lbs.): 26.5 oz (750g)    Photo Gallery   Autorotation system Changeable Bell-Hiller mixing ratio High-positioned battery tray Easily accessible and changeable motor pinions Super strong and lightweight one-piece main frame One-piece molded landing skid Precise tail pitch control system 120 degree ECCPM control system New scheme & decals for 2.4G SC edition

TTR4839-F08M2A1 Thunder Tiger Raptor 30 V2 RC Helicopter Super Combo 2.4Ghz

Detailed Description

Overview This is the smallest machine among the nitro-powered Raptor family and it comes in a 95% pre-assembled package with everything from the gyro to the control linkages. The programmable Sky Tech TS6i programmable transmitter has been setup for fast and easy learning and gives you room to grow as your skill levels develop. The Super Combo includes everything and is a great introduction to nitro heli flying, and the novice nitro pilot does not need to worry about systems compatibility anymore. All is taken care of and you only need to focus on how to get the helicopter in the air.   Features    ? Adopt iFHSS 2.4G radio system, 6-ch multi fuction & 8 model memory radio.     ? New designed shceme & decal.    ? Rugged Collective Pitch Control Arm     ? 6mm Engine Starting Shaft     ? Solid 6mm Spindle     ? Oversized Tai Rotor Grip as R60     ? Lengthened Vertical Fin by 10mm     ? Rigid Boom Support With Plastic End     ? Wider Tank with 340cc Capacity     ? Complete line of optional parts available.     ? Super Combo Version, everything you need included.   Raptor 30 2.4G Super Combo includes:    ? Raptor 30 V2 x 1     ? PRO-39H(R) x 1     ? Sky Tech TS6i Radio System x 1 set (Including Tx/Rx battery and charger)     ? S1903 Standard Servo x 4     ? DS0606 Digital Rudder Servo x 1     ? TG-7000 Heading Lock Gyro x 1   ACE RC TS6i - iFHSS 2.4G radio system ACE RC TRS601DD 2.4G receiver ACE RC TG-7000 Heading Lock Gyro ACE RC DS0606 digital rudder servo ACE RC S1903 control surface servos PRO-39H(R) heli engine Specifications     ? Full Length of Fuselage(mm / in.): 45.27" (1150mm)      ? Full Width of Fuselage(mm / in.): 5.51" (140mm)      ? Total Height(mm / in.): 15.75" (400mm)      ? Main Rotor Dia(mm / in.): 49" (1245mm)      ? Tail Rotor Dia(mm / in.): 9.3" (236mm)      ? Gear Ratio: 1:9.56:4.57      ? Full Equipped Weight(g/ lbs.): 6.6 lb (3000g) Photo Gallery   Rugged Collective Pitch Control Arm Solid 6mm Spindle Wider Tank with 340cc Capacity Exclusive scheme for R30 2.4G SC edition Lengthened fins & oversized tail rotor grip Rigid boom support with plastic end

TTR4853-F08M2A1 Thunder Tiger Raptor 50 V2 RC Helicopter Super Combo 2.4Ghz

Detailed Description

Overview Ego Booster !!! The machine comes all fitted in a Super Combo specifically designed for the most demanding pilots out there. An advanced 2.4G radio system, a metal main rotor hub with button, an exclusive sport edition Redline 53HX engine fitted with Redline pipe muffler, and a brand new FRP canopy in striking colors are just some of the most visible upgrades. A closer look also reveals an extended tail boom to fit 620mm blades, push-pull control system, rear-mounted tail servo tray, and reinforced main shaft. 3D pilots will be amazed by the Raptor 50 SC?s crisp response, and beginners will love it for its stability.   Features    ? Redline power system    ? Rotor Head upgrade to 3D suite    ? Exclusive FRP canopy & decals for 2.4G edition    ? Includes FRP main rotor blades    ? Longer tail boom to fit 620mm blades    ? Stainless steel flybar & linkage rods    ? Harden main shaft    ? Heavy-duty clutch bell    ? Push-pull control system   Raptor 50 2.4G Super Combo includes:    ? Raptor 50 with 3D suite main rotor head ARF x 1     ? Red Line power system (Exclusive RL-53HX engine & RL Muffler) x 1 set    ? ACE RC TS6i 2.4G 6-channel radio system (Tx with Module + Rx) x 1 set    ? ACE RC TG-7000 Heading Lock Gyro x 1    ? ACE RC DS0606 digital rudder servo x 1    ? ACE RC S1807MG surface control servo x 4    ? Exclusive FRP main baldes x 1 pair    ? Batteries & Tx charger    ? Raptor 50 Titan Instruction Manual x 1    ? Additional Manual (Upgrade to 3D suite) x 1    ? ACE RC TS6i Instruction Manual x 1    ? All electric devices Instruction Manuals x 1 set ACE RC TS6i - iFHSS 2.4G radio system ACE RC TRS601DD 2.4G receiver ACE RC TG-7000 Heading Lock Gyro ACE RC DS0606 digital rudder servo ACE RC S1807MG control surface servos Red Line power system - Exclusive RL-53HX engine Red Line power system - Exclusive RL Muffler Exclusive FRP Canopy & scheme for 2.4G SC edition Exclusive 600mm FRP blades   Specifications     ? Full Length of Fuselage(mm / in.): 1220/48.03"      ? Full Width of Fuselage(mm / in.): 140/5.51"      ? Total Height(mm / in.): 400/15.74"      ? Main Rotor Dia(mm / in.): 1345/52.95"      ? Tail Rotor Dia(mm / in.): 236/9.29"      ? Gear Ratio: 8.5:1:4.56      ? Full Equipped Weight(g/ lbs.): 7.6/16.76    Photo Gallery   Longer Tail Boom to fit 620mm blades Push-Pull control system - Aileron Push-Pull control system - Elevator Rear-mounted rudder servo tray 10mm diameter reinforced main shaft Posts for FRP fuselage Stainless steel flybar rod & linkage rods Heavy-duty clutch bell (larger size) Upgrade to metal rotor head (3D Suite)

The design of flybarless balance characterizes low power loss and great efficiency improvement.
Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners.
Compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly.
New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time.
The flying time can reach 9minutes-11minutes for one battery cycle with the high performance brush motor and the high capacity Lipo battery .

1). Main Rotor Diameter: 440 mm
2). Tail Rotor Diameter: 94 mm
3). Overall Length: 425 mm
4). Drive Motor: 370SH
5). Tail Motor: 1225FC35
6). Battery: 7.4V 1000mAh Li-Po
7). Gyro: 3 AXIS
8). Transmitter: WK-2403
9). Receiver: RX-2440V
10).All-up Weight: 275g (Battery included)

Set transmitter off
Connecting the battery to receiver (or 4 in 1 mix controller)
Press the bind keystoke for 1-2 seconds, LED indicator will twinkle constantly, which indicates that unbinding has completed. (as shown in the picture bellow)
Rebinding
Disconnect the receiver (or 4 in 1 mix controller)
Connect the receiver or 4 in 1 mix controller to the battery, the LCD indicator twinkles slowly
Turn on transmitter, LED on transmitter flashes
LED on receiver twinkling slowly to rapidly, and then turns solid, which indicate the binding is successful
 

This module is a low-power consumption LCD Module with a built-in controller.
The module can be easily interfaced with a MCU.
Display Format: 20 Characters x 4 lines.
It is fantastic for Arduino based project.
Fully assembled and tested

Size:
98mm x 13.9mm x 59.9mm
Package include:
1 x 2004 LCD Module Display

The Double Horse 9104 3 Channel RC helicopter has a simple to use, fully functional 3 channel control system. It is constructed with an all aluminum frame and tail-boom. The chopper measures 28 inches in length and 7 inches in height with a rotor diameter of 21 inches. Stability is achieved with an onboard gyro. Power is produced from a 370 motor backed by a 2 cell lithium battery.

In the air it looks elegant and powerful, at the same time the handling and performance are smooth and excellent. It is ready to fly out of the box allowing you to get setup and flying in a matter of minutes.

Features

Directions: up/down, forward/backward, clockwise/counter-clockwise rotation
Fine tuned to the highest standard
Stable flying and fixed-point hovering
Available in Red and Blue
Alloy structure, sleek design

Specs

Main rotor diameter: 490mm
Tail rotor diameter: 90mm
Control range: About 30m or below
Length: 71cm
Weight: 480g
Flight duration: About 8-10 min
Charging time: About 1.5 hours
Battery: 7.4v 1300mah Lipo
Transmitter Batteries: 8 AA (not included)


Package Included

1 x Double Horse 9104 Helicopter
1 x 3 Channel Remote Controller
1 Pair x Spare Main Blade
1 x Spare Tail Rotor Blade
1 x Charger
1 x Balance Charger Box

The Double Horse 9104 3 Channel RC helicopter has a simple to use, fully functional 3 channel control system. It is constructed with an all aluminum frame and tail-boom. The chopper measures 28 inches in length and 7 inches in height with a rotor diameter of 21 inches. Stability is achieved with an onboard gyro. Power is produced from a 370 motor backed by a 2 cell lithium battery.

In the air it looks elegant and powerful, at the same time the handling and performance are smooth and excellent. It is ready to fly out of the box allowing you to get setup and flying in a matter of minutes.

Features

Directions: up/down, forward/backward, clockwise/counter-clockwise rotation
Fine tuned to the highest standard
Stable flying and fixed-point hovering
Available in Red and Blue
Alloy structure, sleek design

Specs

Main rotor diameter: 490mm
Tail rotor diameter: 90mm
Control range: About 30m or below
Length: 71cm
Weight: 480g
Flight duration: About 8-10 min
Charging time: About 1.5 hours
Battery: 7.4v 1300mah Lipo
Transmitter Batteries: 8 AA (not included)


Package Included

1 x Double Horse 9104 Helicopter
1 x 3 Channel Remote Controller
1 Pair x Spare Main Blade
1 x Spare Tail Rotor Blade
1 x Charger
1 x Balance Charger Box

CARBON FIBER MAIN BLADES
RECOMMENDED FOR EXCEED RC Exceed-RC G2 FOR GROUND BREAKING 3D ACROBATIC FLYING!!!

Perfect For The Dragonfly 35, 35, Zoom Zap and 400 Shogun RC Helicopters!

Simple to replace and will last a lot longer then the current stock blades!

Time to upgrade your current main blades!!

The S101 3Ch Mini  RC Helicopter is one of the smallest and lightest 3 channel helicopter out there. This helicopter is designed for indoor flight only. The double rotor design helps stabilize flight and makes it easier to control. This model is the smallest and easiest to control 3 channel on the market. Control right from your hands to any room around 10 meters and with the long lasting Lipo Battery that last up to 7 minutes of flight time.

Feature:

Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands)
Real life helicopter styling
3 channel digital proportional control
Built in Gyro for Extra Stability
Unique material withstand crashes
Flies over 100m high
2 powerful 370 main motors + N20 tail motor
Newly designed super strong crashworthy propeller
Altitude and rotor speed control
Flight stabilizing system
Super lightweight airframe
Brake for easy landing
Up to 60m (200 ft) radio control range
Ready To Fly, Easy To Fly
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the radio transmitter to start flying)
 

Specification:

Length: 665mm (26.18 inch)
Main Rotor Diameter: 535mm (21.06 inch)
Battery: 7.4V Lipo battery
Flight Time: 10 minutes
 

Package Include:

Helicopter (100% assembled)
3 Channel Radio Remote Controller
Rechargeable 7.4V Lipo Battery for Helicopter
AC wall battery charger
English Manual
 

The S101 3Ch Mini  RC Helicopter is one of the smallest and lightest 3 channel helicopter out there. This helicopter is designed for indoor flight only. The double rotor design helps stabilize flight and makes it easier to control. This model is the smallest and easiest to control 3 channel on the market. Control right from your hands to any room around 10 meters and with the long lasting Lipo Battery that last up to 7 minutes of flight time.

The S101 3Ch Mini  RC Helicopter is one of the smallest and lightest 3 channel helicopter out there. This helicopter is designed for indoor flight only. The double rotor design helps stabilize flight and makes it easier to control. This model is the smallest and easiest to control 3 channel on the market. Control right from your hands to any room around 10 meters and with the long lasting Lipo Battery that last up to 7 minutes of flight time.

The new sleek U13A 2.4GHz 3 channel metal framed helicopter comes with a built in gyro to help keep flight as stable as possible. Equipped with a video camera, the U13A adds an exciting new aspect to RC helicopters. The digital 2.4GHz transmitter and receiver helps to maintain a strong connection between the pilot and the copter. This helicopter is perfect for recording videos and making fun movies from angles that would otherwise be impossible without costly camera equipment.

Specifications:
1. Propeller Diameter: 10 inches
2. Length: 11inches
3. Height: 6 inches
4. Approximate flying time: 10 minutes
5. Battery: Lithium Polymer Battery

Package Includes:

1. U13A 3 Channel Helicopter
2. Video Camera
3. 2.4ghz Remote Transmitter
4. Rechargeable Lithium Polymer Battery
5. AC Wall Charger
6. Instructions

Micro SD is NOT included

The new sleek U13A 2.4GHz 3 channel metal framed helicopter comes with a built in gyro to help keep flight as stable as possible. Equipped with a video camera, the U13A adds an exciting new aspect to RC helicopters. The digital 2.4GHz transmitter and receiver helps to maintain a strong connection between the pilot and the copter. This helicopter is perfect for recording videos and making fun movies from angles that would otherwise be impossible without costly camera equipment.

Specifications:
1. Propeller Diameter: 10 inches
2. Length: 11inches
3. Height: 6 inches
4. Approximate flying time: 10 minutes
5. Battery: Lithium Polymer Battery

Package Includes:

1. U13A 3 Channel Helicopter
2. Video Camera
3. 2.4ghz Remote Transmitter
4. Rechargeable Lithium Polymer Battery
5. AC Wall Charger
6. Instructions
7. 4GB SD card

Go fly your dream! Capture your precious moments with this amazing helicopter. Thanks to the built in Gyro, you can precisely and smoothly record videos and audio, and take photos of all your memorable moments during the flight. Easy to upload online and share with your family and friends.

Features

Capture high quality photos and videos straight from the cockpit of the helicopter
Upload your videos and photos easily via the included USB cable
Made of lightweight and durable ABS plastic
Built in Gyro provides stable and elegant flight, outstanding hovering capability
New electricity saving function and battery model means longer battery life
Beautiful and bright LED lights in the dark
Everything included and camera mounted, ready to fly and video/photo taking

Specs

Photo Resolution: 320x240
Video Resolution: 640x480
Memory: 512MB
Length: 375mm
Width: 115mm
Height: 160mm
Main Rotor: 300mm
Tail Rotor: 50mm
Motor: N50x2
Frequency: 27MHz/49MHz
Control Range: 20-30m
Helicopter Battery: 3.7V 650mAh LiPo
Charging Time: About 80 minutes
Flight Time: About 15 minutes

Needed to complete

6 x 1.5V AA Batteries for Transmitter

Go fly your dream! Capture your precious moments with this amazing helicopter. Thanks to the built in Gyro, you can precisely and smoothly record videos and audio, and take photos of all your memorable moments during the flight. Easy to upload online and share with your family and friends.

Features

Capture high quality photos and videos straight from the cockpit of the helicopter
Upload your videos and photos easily via the included USB cable
Made of lightweight and durable ABS plastic
Built in Gyro provides stable and elegant flight, outstanding hovering capability
New electricity saving function and battery model means longer battery life
Beautiful and bright LED lights in the dark
Everything included and camera mounted, ready to fly and video/photo taking

Specs

Photo Resolution: 320x240
Video Resolution: 640x480
Memory: 512MB
Length: 375mm
Width: 115mm
Height: 160mm
Main Rotor: 300mm
Tail Rotor: 50mm
Motor: N50x2
Frequency: 27MHz/49MHz
Control Range: 20-30m
Helicopter Battery: 3.7V 650mAh LiPo
Charging Time: About 80 minutes
Flight Time: About 15 minutes

Needed to complete

6 x 1.5V AA Batteries for Transmitter

Go fly your dream! Capture your precious moments with this amazing helicopter. Thanks to the built in Gyro, you can precisely and smoothly record videos and audio, and take photos of all your memorable moments during the flight. Easy to upload online and share with your family and friends.

Features

Capture high quality photos and videos straight from the cockpit of the helicopter
Upload your videos and photos easily via the included USB cable
Made of lightweight and durable ABS plastic
Built in Gyro provides stable and elegant flight, outstanding hovering capability
New electricity saving function and battery model means longer battery life
Beautiful and bright LED lights in the dark
Everything included and camera mounted, ready to fly and video/photo taking

Specs

Photo Resolution: 320x240
Video Resolution: 640x480
Memory: 512MB
Length: 375mm
Width: 115mm
Height: 160mm
Main Rotor: 300mm
Tail Rotor: 50mm
Motor: N50x2
Frequency: 27MHz/49MHz
Control Range: 20-30m
Helicopter Battery: 3.7V 650mAh LiPo
Charging Time: About 80 minutes
Flight Time: About 15 minutes

Needed to complete

6 x 1.5V AA Batteries for Transmitter

Go fly your dream! Capture your precious moments with this amazing helicopter. Thanks to the built in Gyro, you can precisely and smoothly record videos and audio, and take photos of all your memorable moments during the flight. Easy to upload online and share with your family and friends.

Features

Capture high quality photos and videos straight from the cockpit of the helicopter
Upload your videos and photos easily via the included USB cable
Made of lightweight and durable ABS plastic
Built in Gyro provides stable and elegant flight, outstanding hovering capability
New electricity saving function and battery model means longer battery life
Beautiful and bright LED lights in the dark
Everything included and camera mounted, ready to fly and video/photo taking

Specs

Photo Resolution: 320x240
Video Resolution: 640x480
Memory: 512MB
Length: 375mm
Width: 115mm
Height: 160mm
Main Rotor: 300mm
Tail Rotor: 50mm
Motor: N50x2
Frequency: 27MHz/49MHz
Control Range: 20-30m
Helicopter Battery: 3.7V 650mAh LiPo
Charging Time: About 80 minutes
Flight Time: About 15 minutes

Needed to complete

6 x 1.5V AA Batteries for Transmitter

Feature:

Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands)
Real life helicopter styling
3 channel digital proportional control
Built in Gyro for Extra Stability
Unique material withstand crashes
Flies over 100m high
2 powerful 180 main motors + N20 tail motor
Newly designed super strong crashworthy propeller
Altitude and rotor speed control
Flight stabilizing system
Super lightweight airframe
Brake for easy landing
Up to 60m (200 ft) radio control range
Ready To Fly, Easy To Fly
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the radio transmitter to start flying)
 

Specification:

Length: 610mm (24.01 inch)
Main Rotor Diameter: 510mm (20.07 inch)
Battery: 7.4V 1300mAh Lipo battery
Flight Time: 10 minutes
 

Package Include:

Helicopter (100% assembled)
3 Channel Radio Remote Controller
Rechargeable 7.4V Lipo Battery for Helicopter
AC wall battery charger
English Manual

Key Features

• Directions: Up/Down, Forward/Backward, Right/left turn, and Hovering.
• Functions: Left/right missile launch, Acceleration, Missile launch with Sound
  

Specs

• Model ID: U810
• Product Dimensions: 23*5.5*11 cm
• Package Dimensions: 48*8.7*18.5 cm
• Color: Steel Gray
• Control Distance: 10m +
• Flying Time: 6-8 minutes
• Charging Time: 45 minutes
• Charging methods: USB and transmitter
• I-Helicopter Adapter for Iphone & Android Device Capability (Sold Separately) Not Included)

Package Includes

• Helicopter
• Helicopter's Battery 3.7V 160mah
• Transmitter (Batteries not included)
• Missiles
• USB Cable
• Spare Blades
• Tail Rotor
• English Manual

Danger: Never point or shoot missiles at people or animals. Adult supervision is required.

Please read instruction before operating

Transmitter requires 6 x AA dry cells (not included)

This detailed Vortex M100 is beautifully designed and made in high strength aluminum frame, so it is highly stable and durable. Advanced pilots are impressed with this new amazing helicopter; at the same time it is great for beginners to learn flying.
It is able to fly freely in 4 directions, as a high performance infrared 3.5 Channel controller is included. Built in Gyroscope let it flies stably and smoothly in easy to learn controls. Amazing flight distances, long flying time, and Ready to Fly, Vortex M100 is another welcome addition in our Dynam product line.
This model is miniature in size and lightweight, making it incredibly portable so you can take it anywhere you go. It also offers a wide infrared control and a design that is customized for indoor flying. Available in blue, red, and yellow.

Special Features

Function: Up/down, turn left/right, and move forward/backward
Interference is not a problem with 2 bands of frequencies
Outstanding Hovering ability
Rotor and Altitude Speed Control with Easy Landing Brake feature
Coaxial Structure and Flight stabilizing system with Gyro
Lightweight and fast, highly durable material
Fun for all ages
3.5 Channel Wide Infrared Controls
USB Charge
Ready to Fly

Spec:
Weight: 33g
size: 220x38x98(mm)
Dimensions: main rotor diameter 200mm
Helicopter battery: 3.7v li-po battery
Charging Time: 40 minutes (usb charger)
Flight Duration: about 8 minutes
Frequency: Infrared control system - bands A, B
Control Specification: forward / backward / up / down / left / right
Range: Up to 10m (30ft)
  

Needed to complete
Transmitter Battery: AA Batteries (Not Included)

This detailed Vortex M100 is beautifully designed and made in high strength aluminum frame, so it is highly stable and durable. Advanced pilots are impressed with this new amazing helicopter; at the same time it is great for beginners to learn flying.
It is able to fly freely in 4 directions, as a high performance infrared 3.5 Channel controller is included. Built in Gyroscope let it flies stably and smoothly in easy to learn controls. Amazing flight distances, long flying time, and Ready to Fly, Vortex M100 is another welcome addition in our Dynam product line.
This model is miniature in size and lightweight, making it incredibly portable so you can take it anywhere you go. It also offers a wide infrared control and a design that is customized for indoor flying. Available in blue, red, and yellow.

Special Features

Function: Up/down, turn left/right, and move forward/backward
Interference is not a problem with 2 bands of frequencies
Outstanding Hovering ability
Rotor and Altitude Speed Control with Easy Landing Brake feature
Coaxial Structure and Flight stabilizing system with Gyro
Lightweight and fast, highly durable material
Fun for all ages
3.5 Channel Wide Infrared Controls
USB Charge
Ready to Fly

Spec:
Weight: 33g
size: 220x38x98(mm)
Dimensions: main rotor diameter 200mm
Helicopter battery: 3.7v li-po battery
Charging Time: 40 minutes (usb charger)
Flight Duration: about 8 minutes
Frequency: Infrared control system - bands A, B
Control Specification: forward / backward / up / down / left / right
Range: Up to 10m (30ft)
  

Needed to complete
Transmitter Battery: AA Batteries (Not Included)

The 300DF is a light motor, designed to fly park flyers. Use the 300DF with a 3:1 or gearbox and large prop 8x4, or a speed demon on a 5x3 inch or smaller prop. 2 cell Lipo or 3 cell Lipo can be used with all this motor, but best performance can be achieved by using 3 cells+4.5:1 gear ratio with 12X6, or 11X7 or 11X4.7 props. The data for other props and gears:

For 3.4:1 gearing use 11x7 HD, 11x4.7 SF

For 4.5:1 gearing use 12x6, 11X4.7, 11X7 SF

300DF pusher props have proven to be spectacular. It has been flown with Wing Warrior Zaggis, Wattage HyperWing and Edge RC delta wing planes. Using a small prop direct drive and wings around 16 Oz weight, this is the best you can get at this price. With a 5x4 prop it draws about 12 amps. It is equally good with large props in a gearbox. So decide whether you want speed - 50+ MPH or slow fly with large props and a lot of torque and use this motor for both.
 

Volcano Series brushless ESC are micro processor controlled and will work with all types of brushless motors. The Volcano Series brushless ESC can be used in airplanes, sailplanes, helicopters, or 3D helicopters. The controllers come pre-programmed and are ready to use when you receive them. Additional controller adjustments are available and can be accessed and adjusted with your transmitter and program card [ Features \\|\\ Specifications \\|\\ Instruction Manual] Innovative Discharge Monitoring and Protection Design for real time battery pack monitor Multiple protection features: Low-voltage cut-off protection, over-heat protection, throttle signal loss protection 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters Throttle range can be configured and is fully compatible with all transmitters currently available on the market Smooth, linear and precise throttle response Separate voltage regulator IC for the microprocessor Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles) Our pocket-sized Program Card can be purchased separately to provide easy programming to the ESC at the field. With a program card, you can activate the music playing function on the ESC Model #: Volcano-30 (07E04) Cont. Current: 30A Burst Current (>10s): 40A BEC Mode: Linear BEC Output: 5V/2A Li-ion/Li-poly: 2-4 Ni-MH/Ni-Cd: 5-12 Prgrammable: Yes Weight: 25g Size: 34*24*11

REAL Canbon, Light Weight, Strong and hard to crash. More Stable flying. Best choice for RC Helicopter. Electric 450 Standard such as Align Trex 450 and Esky Belt CP! Our Carbon Fiber Blades are Absolutely the Best Blades in the Market Today! Guarantee!!!

REAL Canbon, Light Weight, Strong and hard to crash. More Stable flying. Best choice for RC Helicopter. Electric 450 Standard such as Align Trex 450 and Esky Belt CP! Our Carbon Fiber Blades are Absolutely the Best Blades in the Market Today! Guarantee!!!

?

?

Specification:

Function: Can fly in 6 different directions: up and down, turn left and right, fly forward
Battery: 3.7v100mAh
Charge time: 20-30minutes
Aviate Time: 5-6minutes
Helicopter battery: Rechargeable lithium polymer battery
Frequency: Infra red control system
Range: Up to 10m (30ft)

This helicopter box set includes:
- Helicopter
- Remote Controller
- User Manual
- Extra :1 X Tail Rotor
- Extra : 1 X Flybar Connection Road
 

High quality Backpack case for all DJI Phantom Models including DJI Phantom 1, DJI Phantom 2 + H3-2D or H3-3D, DJI phantom 2 Vision, DJI Phantom 2 Vision+, Aerosky X350, Airfield X350, and Walkera QR350.

This carrier combines the rigidity of a case and the convenience of a backpack. Featuring a precision cut custom foam interior and a easy to carry backpack type durable nylon and hard plastic outer shell, the Backpack Case from HobbyPartz.com provides a handy solution for storing and transporting your machine and its accessories. In addition to the aircraft and built-in camera, the case will hold transmitter, flight batteries, charger, monitors, and miscellaneous items such as spare props, cables, and other items. The outer shell of the case pack consists of a velcro side pocket and elastic pocket while the front features a zippered pocket for other accessories.

Features: 
Inner foam pre-cut for all 350 Models
Sleek design
Exterior protection
Backpack Case

Dimensions:
39*25*49cm

High quality Backpack case for all DJI Phantom Models including DJI Phantom 1, DJI Phantom 2 + H3-2D or H3-3D, DJI phantom 2 Vision, DJI Phantom 2 Vision+, Aerosky X350, Airfield X350, and Walkera QR350.

This luxury carrier combines the rigidity of a foam case and the convenience of a backpack. Featuring a precision cut custom foam interior and a easy to carry backpack type durable nylon and hard plastic outer shell, the Luxury Protective Backpack Case from HobbyPartz.com provides a handy solution for storing and transporting your machine and its accessories. In addition to the aircraft and built-in camera, the case will hold transmitter, flight batteries, charger, monitors, and miscellaneous items such as spare props, cables, and other items. The outer shell of the case pack consists of a velcro side pocket and elastic pocket while the front features a zippered pocket for other accessories.

Features: 
Inner foam pre-cut for all DJI Phantom Models
Sleek design
Exterior protection
Backpack Case

Dimensions:
39*25*49cm

High quality Backpack case for all DJI Phantom Models including DJI Phantom 1, DJI Phantom 2 + H3-2D or H3-3D, DJI phantom 2 Vision, and the new DJI Phantom 2 Vision+.

This luxury backpack combines the rigidity of a case and the convenience of a backpack and also offering waterproof protection. Featuring a precision cut custom foam interior and a easy to carry backpack type durable nylon and hard plastic waterproof outer shell, the Luxury Waterproof Protective Travel Backpack Case from HobbyPartz.com provides a handy solution for storing and transporting your machine and its accessories. In addition to the aircraft and built-in camera, the case will hold transmitter, flight batteries, charger, monitors, and miscellaneous items such as spare props, cables, and other items. The outer shell of the case pack consists of a velcro side pocket and elastic pocket while the front features a zippered pocket for other accessories.

Features: 
Inner foam pre-cut for all 350 Models
Sleek design
Exterior protection
Backpack Case
Waterproof

Dimensions:
39*25*49cm

These 350-type rc helicopters come fully assembled with all pre-flight adjustments completed. Using the latest technology available, the receiver, gyro, servo and motor control amp are combined into the high performance one-piece Flight Control Unit, and transmitter is with mode-lock switch. Modified PIT and PLT parameter is lockable. It is READY TO FLY with 10-15 minutes of flight time on each charge, only requires AA Batteries for Transmitter. Optional Li- poly battery (included with selected helis) will help to achieve better performance and longer flight time.