ESKY Honey Bee CP2 6-Channel Radio Remote Controlled RC Helicopter w/ Collective Pitch & Ready to Fly ESKY005A-HoneyBeeHelicopter
Honey Bee series RC Helicopter features merits of flight stability, Superior
strength,Simple openation and durability ,which are favered by the model lovers all the world.
Honey Bee cp2 is designed as a 3D aerobatics mini-electric helicopter,CCPM
system and three ESKY Servos can ensure the accuracy and Sensitivity.11.1v
1000mAh lithium battery extend the flying time up to 12 mins at a time,4 in 1
controller gathers functions of ESC,mixer,receiver and Gyro, facilitates the
adjustment and maintenance of helicopter.Honey Bee cp2 destined to become a
This model is suitable
for r/c helicopter intermediate pilot, 3D aerobatic action and inverted flight
is possible! Stunt flyer! This is a Ready To Fly Kit, just charge the battery
and fly out of box,only
need * AA Batteries for Transmitter
CCPM (cyclic collective pitch mixing) design provide precise
movement and lighten the helicopter. Bell-hiller mixer provide immediate
respond to the helicopter.
|(1).Main rotor diameter: 530mm;
(4).Main blade: wooden;
(5).Power system: 370 motor;
|(7).Control mode: CCPM system;
(8).Transmitter: 6CH CCPM system;
(9).Mix controller: "4IN1"controller(W/gyro,mixer,ESC,receiver)
(11).Battery: 11.1V 1000mAh Li-Polymer;
This helicopter is
suitable for intermediate pilot or pilot who want to try inverted fly and mild
120 deg CCPM system
provides precise movement if comparing with the traditional mechanical mixing
since there are less linkage/push-rod in the helicopter,and weight is greatly
greatly increase the sensitive of the whole helicopter, which provide good
O-ring inside the
center hub reduce oscillation of main blades
11.1V high capacitance
Li-Po battery provide enough power for any aerobatic flight(about 15 min flight
time per full charge).
Light and hardened wood
blade provide great lift, only weigh 11g.
Metal ball swashplate
has improved the stability and sensitive of the whole machine.
Pre position servo
mounts have been added in this heli, servos can be mounted solidly by screw and
easy to install.
servo push-rod, precision sub trim can be easily set.
Separate main shaft and
main gear reduce repair time and noise.
Extended tail boom,
reduced the load of tail motor.
Weight is a key to a EP
heli, lightened skid set, main gear, main frame and canopy reduce the load of
performance outdoor and indoor.
|(1).High-precision, high inertia of the main rotor head design,
ccpm control system.
|(3).3 Servos support the CCPM controlling system,ensuer the
helicopter react fast and nimbly and let it do all kinds of 3D trick flight.
Dimensions (mm) :Rotary
Wing Span = 515mm, length = 520mm
Full 6CH RC HELI --- EVERYONE
CAN AFFORD TO TRY
Powerful Main Motors and Tail
6 Channel R/C Set included,
complete Forward/Backward, Left/Right, Up/Down Control(RUDDER, AILERON,
ELEVATOR AND THROTTLE, PITCH)
6CH LED Display Multifunctional
High Quality mixer + gyro board
Powered by 11.1V Li-polymer
1000mAh re-chargable battery
Easy Assembly , RTF Ready To
Fly, only need * AA Batteries for Transmitter
About 15mins Flight time for
Full Parts support
Suitable for Backyard/Park
|1. Esky HoneyBee CP2
2. Original Speed Mixer+Gyro Board
3. 6 Channel Receiver
4. 72MHz 6Ch LED Display Multifunctional Transmitter
5. 3 X 9g Servos
6. 1 Pair of Crystals
7. Li-polymer 11.1V 1000mAh Rechargeable Battery, more power provided
8. DC 12-15V Charger for7.4 V & 11.1V Li-Po battery
9. English Manual
(1).You can begin to
fly after fixing the battery and unwrapping the packing;
(2).3D aerial acrobatics is available;
(3).Flight is stable, reaction is sensitive and rapid, and controllability is
(4).Designed with beginner and 3D fun flyers in mind;
(5).Simple structure ensures convenient adjustment and maintenance;