Esky Scale RC 3D Scale Helicopter RTF Radio Controlled RC Helicopter |
The new Champion helicopter, fabricated with glass fiber
and processed by spray-painting, has stunning colors and high glossiness. This
new Champion is equipped with a high performance brushless motor , brushless speed
controller, a high capacity 11.1V 1800mah 20C Li-Po battery, and a
durable fiberglass scale fuselage. All spare parts are available from XHeli.com.
The Scale Fuselage requires user to fit together.
Included Fiberglass Fuselage DOES NOT come assembled. Helicopter Frame is
100% Built-Ready-to-Fly.
- 6 Channel R/C Set included, complete Forward/Backward, Left/Right,
Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
- New 6 channel Transmitter with PIT and PLT mode lock switch and
adjustable knob
- High performance 3800KV brushless motor used as the main drive
- Powerful 11.1V 1800mAh 20C high capacitance Li-Po battery provide
enough power for any aerobatic flight
- Strong lightweight Main Blades, Tail Blades, and Flybar
Paddles
- Improved Body Frame (Strong & Light)
- Improved blades give superior lift. Their pop off design gives extra
protection in case of heavy landing
- Perfect for people who wants to move up from 4ch helicopter
- Perfect for intermediate pilots or pilots who want to try inverted fly
or 3D aerobatic flight
- CCPM mixing control system and collective pitch structure make perfect
3D maneuvers such as roll, inverted, and swoop flights
- 120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the
helicopter and weight is greatly reduced
- Bell-heller mixing greatly increase the sensitive of the whole
helicopter, which provide good aerobatic responds
- O-ring inside the center hub reduce oscillation of main blades
- The autorotation landing system, made of high quality one-way bearing,
maximally protects your helicopter from damage
- Hard, Light weight Main Blades
- Brand new design for the structure
- Improved battery support that holds the battery firmly, and can also
be adjusted to suit your balance of flying
- Tail rotor driven by belt provide stable flight and low noise
- NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder
like Gas-Helicopter
- No need to worry about burning tail motors
- Light and hardened wood blades provide great lift, only weight 11g
- Outer placed professional gyro
- With length-adjustable servo push-rod, precision sub trim can be
easily set
- Extended tail boom, reduced the load of tail motor
- Separate main shaft and main gear reduce repair time and noise
- Weight is a key to a EP helicopter, lightened skid set, main gear,
main frame and canopy reduce the load of whole helicopter
- Almost Unbreakable Rotor Head
- Easy to fly and more stable lifting
- PCM receiving and transmitting system increases the operation
stability
- CCPM mode with adjustable pitch system and 3D conversion
- Provide excellent performance outdoor and indoor
- Tail blade adopt flameout landing system
- Metal ball swashplate has improved the stability and sensitive of the
whole machine
- Newly Designed Rotor Head gives better control
- Pre position servo mounts have been added in this helicopter, servos
can be mounted solidly by screw and easy to install
- Extreme smooth control and stable flight
- Precise controlling and hovering
- Can fly in skyway, backward, and 3D aerobatic
- Digital Proportional Motor Speed Control
- Suitable for Indoor/Outdoor/Backyard/Stadium
- Using the tough plastic materials, the Helicopter does have
very strong structure. In addition, the main rotor blades are using top
quality wood materials, which is extremely light and not easily break.
- Approximately 20 minutes flight time on each charge - Optional Li-
poly battery will help to achieve better performance and longer flight
time.
- Best choice for Beginner - Advanced hobbyist
- All spare parts and accessories are available
- Complete Kit, Ready to Fly (Everything is included and 100%
assembled -- 8 AA batteries for the transmitter also included)
|
- Main Rotor Diameter: 737mm (29 inch )
- Tail Rotor Diameter: 130mm (5 inch)
- Length: 838mm (33 inch)
- Width: 114mm (4.5 inch)
- Height: 241mm (9.5 inch)
- Flying Weight: 820g (1.8 lb)
- Drive System: 3800KV brushless motor
- Rotate Ratio: 12:140/10:22
- Servo: 4x 8g servos
- Speed Controller: 25A brushless ESC
- Battery: 11.1V 1800mah 20C 3-Cell Li-Polymer
- Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
- Radio Control Range: 2500 feet (762m)
|
- Helicopter (75% Assembled) w/ Wooden Main Blades + Tail Blades + Flybar Paddles
- 6 Channel CCPM Multifunctional FM R/C Transmitter (8 AA batteries
included)
- 100-240V Wall Battery Balance Charger with Auto Cut-Off
- 11.1V 1800mah 20C 3-Cell Li-Polymer Rechargeable Battery
- BONUS - Simulator Kit and Software (Practice flying airplanes and
helicopters on your computer)
- English Manual
|
|
