Full CCPM 6-Channel Aerobatic Radio Remote Control Electric RC Helicopter RTF w/ Brushless Set & Li-po Battery
This is the latest version 2 of the Falcon 3D helicopter equipped with the
latest radio control set with LCD display, cable for simulator, new gyro, and a
strengthened tail pipe. This helicopter is made of special material, and has the
ability of anti-bearing and crash resistant which lowers the maintenace cost.
Furthermore, this kit includes a flight simulator kit (USB cable + software),
training video CD, and a crash training kit.
25-1/4" main rotor diameter, 23-3/4" overall length, 20 oz. flying weight.
Falcon 3D comes completely assembled and ready to fly. Helicopter has plenty of
power and head speed for sport flying and aerobatics. Includes a brushless
motor, brushless controller, gyro, 1300 mAh Lipo battery, wood blades, aluminum
tail boom, training landing gear, and 6-channel 72 mHz FM helicopter
transmitter. Charge the 1300 mAh lipo battery with the included cell balancing
Lithium charger, from a 12 volt DC battery. Gear driven tail has all conical
gears for smooth, reliable operation. Transmitter has pitch range centering and
pitch curve end point adjustment knobs, and an Idle-up switch for aerobatic and
inverted flight modes. Also includes training gear with Ping Pong balls and a
blade holder. Transport in its original box.
For one price, you get everything you need to get started in aerobatic
helicopters. The Falcon 3D V2 is capable of all the basic 3D helicopter
maneuvers such as loops, rolls, stall turns, and inverted flight!
Brushless motor with heat sink
Heading-hold gyro
Tail drive with conical gears
Rotor head
Nylon main and autorotation gears
Main frame and landing gear
Feature:
6 Channel R/C Set included, complete Forward/Backward, Left/Right,
Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
New 6 channel Transmitter with LCD display and PIT/PLT mode lock
switch and adjustable knob
NOR collective pitch structure make perfect 3D maneuvers such as roll,
inverted, and swoop flights
Plenty of power and head speed for sport flying and aerobatics
High quality individual head lock gyro
Reliable gear system
Reliable gear system
Accurate tail pitch control system
Tail servo mount for accurate rudder control
Reinforced tail rod
High intensity stainless steel shaft
High quality Plastic main blades
120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the
helicopter and weight is greatly reduced
CCPM mode with adjustable pitch system and 3D conversion
Tail rotor driven by shaft transmission system provide stable flight
and low noise
Mode lock switch to free lock the parameters of PIT & PLT
Main rotor driven by powerful Brushless Motor
NO TAIL Motor - Tail rotor driven by main motor with servo controlled
rudder like gas helicopters
No need to worry about burning tail motors
Tail blade adopt flameout landing system
Bell-heller mixing greatly increase the sensitive of the whole
helicopter, which provide good aerobatic responds
Improved blades give superior lift. Their pop off design gives extra
protection in case of heavy landing
Perfect for people who wants to move up from 4ch helicopter
PCM receiving and transmitting system increases the operation
stability
Improved battery support that holds the battery firmly, and can also
be adjusted to suit your balance of flying
Almost Unbreakable Rotor Head
Weight is a key to a EP helicopter, lightened skid set, main gear,
main frame and canopy reduce the load of whole helicopter
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos
can be mounted solidly by screw and easy to install
Extreme smooth control and stable flight
Precise controlling and hovering
Can fly in skyway, backward, and 3D aerobatic
Suitable for Outdoor/Backyard/Stadium
Using the Ultra tough materials, the Helicopter does have
very strong structure
Approximately 15 minutes flight time on each charge - Optional Li-
poly battery will help to achieve better performance and longer flight
time.
All spare parts and accessories are available.
Complete Kit, Ready to Fly (Everything is included and 100%
assembled -- only required 8 AA batteries for the transmitter to start
flying)
Specification:
Main rotor diameter: 630mm (25 inch)
Tail rotor diameter: 152mm (6 inch)
Length: 770mm (30 inch)
Height: 210mm (8.3 inch)
Flying Weight: 530g (Battery included)
Drive system: In-Runner Brushless Motor w/ Heat Sink
Servo: 4X 9g
Gyro: Headlock Gyro
ESC: 18A Brushless Speed Controller
Battery: 11.1V 1300mAh Li-Po
Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
Radio Control Range: 2500 feet (762m)
Package Include:
Helicopter (100% Assembled)
6 Channel Multifunctional FM R/C Transmitter
Wall Battery Balance Charger
11.1V 1300mAh Li-Polymer Rechargeable Battery
BONUS Helicopter Training Kit
BONUS Simulator Kit and Software (Practice flying helicopters and
airplanes on your computer)
BONUS Training Video CD (RC Helicopter & Airplane Education)
