Walkera 6 CH Dragonfly 1#B CCPM 3D Aerobatic Radio Remote Control Electric RC Helicopter RTF |
This is the latest model and new design
RC dragonfly helicopter. It has the 3D aerobatics capability, while its price
is low in the fixed pitch range. The helicopter comes fully assembled with all
pre-flight adjustments completed. Using the latest technology available, the
receiver, gyro, servo and motor control amp are combined into the high
performance one-piece Flight Control Unit, and transmitter is with mode-lock
switch. Modified PIT and PLT parameter is lockable. It is READY TO FLY with
10-15 minutes of flight time on each charge, only requires AA Batteries for
Transmitter. Optional Li- poly battery will help to achieve better performance
and longer flight time.
-
6 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , and
multistage electricity volume show on the panel
-
6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down
& Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
-
120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the
helicopter and weight is greatly reduced
-
Improved blades give superior lift. Their pop off design gives extra protection
in case of heavy landing
-
Perfect for people who wants to move up from 4ch helicopter
-
Hard, Light weight Main Blades
-
Lightweight body built with strong materials
-
Brand new design for the structure
-
Highly efficient tail motor with elaborate structure
-
Improved battery support that holds the battery firmly, and can also be
adjusted to suit your balance of flying
-
CCPM mode with adjustable pitch system and 3D conversion
-
Powerful 370SH carbon brush motor used as the main drive, and tail rotor driven
by tail motor
-
Almost Unbreakable Rotor Head
-
Provide excellent performance outdoor and indoor
-
Easy to fly and more stable lifting
-
High Quality mixer + gyro board built-in
-
Weight is a key to a EP helicopter, lightened skid set, main gear, main frame
and canopy reduce the load of whole helicopter
-
Metal ball swashplate has improved the stability and sensitive of the whole
machine
-
Newly Designed Rotor Head gives better control
-
Pre position servo mounts have been added in this helicopter, servos can be
mounted solidly by screw and easy to install
-
Extreme smooth control and stable flight
-
Precise controlling and hovering
-
Can fly in skyway, backward, and 3D aerobatic
-
Digital Proportional Motor Speed Control
-
Suitable for Indoor/Outdoor/Backyard/Stadium
-
Using the Ultra tough Carbon Fiber materials, the Helicopter does have very
strong structure. In addition, the main rotor blades are using top quality foam
materials, which is not easily break
-
Approximately 10 minutes flight time on each charge - Optional Li- poly battery
will help to achieve better performance and longer flight time
-
Best choice for Beginner - Advanced hobbyist
-
All spare parts and accessories are available
-
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only
required 8 AA batteries for the transmitter to start flying)
|
-
Main rotor diameter: 555mm (22 inch )
-
Tail rotor diameter: 146mm (6 inch)
-
Overall Length: 560mm (22 inch)
-
Flying Weight: 350g (Battery included)
-
Driven system: 370SH carbon brush motor
-
Servo: 3X 8.5g (speed 0.11sec/60o(4.8V); torque 0.9kg/cm (4.8V) ;dimension
22.5X11.5X24mm)
-
Battery: 7.4V 1000mAh Li-Po
-
Control system: 6CH CCPM Multifunctional FM Transmitter(WK-0601) and Receiver
(RX609)
|
-
Helicopter (100% Assembled)
-
6 Channel CCPM Multifunctional FM R/C Transmitter
-
Wall Battery Balance Charger
-
7.4V 1000mAh Li-Po Rechargeable Battery
-
Extra Pair of Main Blades
-
English Manual
 |
|
