3GX Programmable Flybarless System:

Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.

3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.

Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.

Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.

Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.

With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.

Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.

3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.

Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.

3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.

With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.

3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.

Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

3GX Programmable Flybarless System:

Operating voltage range:DC 3.5V~8.4V

Operating current consumption:<80mA @4.8V

X and Y axis Operating Angle Range:-300~+300 degree

Z axis Operating Angle Range:-600~+600 degree

Sensor resolution:12bit

Supports 90/120/135/140 CCPM swashplates

Spektrum and JR Satellite antennas support (Replaces original factory receiver)

Futaba S.BUS system support

Supports Wide/Narrow Bandwidth Digital and brushless servos

Compatible with 2 to 5 blades rotor heads

Built in governor function

Maximum working voltage:8.5V

Compatible with 1024/2048 resolution Spektrum receivers

Field setup without the use of a PC

Support up to 6 servos

Automatic servo type recognization

Operating Temperature:-20~60 degree

Operating Humidity:0%~95%

Size:36.5x25.2x15.6 mm Size

Weight:11g

Specification:

Length: 705mm

Height: 205mm

Width: 110mm

Main Blade Lenght: 325mm

Main Rotor Diameter: 710mm

Tail Rotor Diameter: 171mm

Motor Drive Gear: 12T

Main Drive Gear: 121T

Autorotation Tail Drive Gear: 106T

Tail Drive Gear: 25T

Drive Gear Ratio: 1:10.08:4.24

Weight(w/o power system): 722g

Standard equipment:

3GX Flybarless System X 1 set

RCE-BL45X 45A Brushless ESC X 1

460MX Brushless Motor(3200kv) X 1

DS416M Digital Servo X 3

DS525M Digital Servo X 1

Accessories:

T-REX 450L DOMINATOR Set X 1 set

3GX Flybarless System X 1 set

325D 3G Carbon Fiber Blades X 1set

RCE-BL45X 45A Brushless ESC X 1

460MX Brushless Motor(3200kv) X 1

DS416M Digital Servo X 3

DS525M Digital Servo X 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)?
2.Receiver(6-channel or more)?
3.Pitch gauge or Digital Pitch Gauge?
4.3S Li-Po 2250mAh battery x 1?

************************************************************************************************************************************

We appreciate you choosing us for all your RC helicopter needs. Please note that all requested returns and exchanges with Align products will subject to a 15% restocking fee. Any tampered, used, damaged product will not be permitted for an exchange or return.

Upon receiving any Align product, please inspect the product or items before opening the package. If an item or part is defective upon arrival, please contact Align.
Align USA would like to provide all technical support for their products. You can contact Align USA at:
Assurance R/C USA
Tel: 562-598-4700
Fax: 562 598-4702
E-mail: sales@alignrcusa.com
Thank you and we appreciate your business.

************************************************************************************************************************************