Collective Pitch Helicopter - White - (ARF) (EK1H-E013D)
Step up to a larger collective pitch heli than the Honey Bee CP2 or Cool
with the Belt CP. The Belt CP has a belt-driven tail rotor for smooth,
vibration free tail control. Airframe only includes assembled helicopter
frame, canopy, blades, motor pinion, and instruction manual. Does not
include servos, motor, or radio gear.
Requires:
4 - E-Sky 8g Servos or equivalent
6 channel receiver and crystal
6 channel CCPM transmitter
28mm diameter brushless outrunner motor with a Kv of 3800 RPM/V and a
2.3mm shaft
25 amp brushless helicopter speed control
Heading Lock Gyro
1200-1800mah 11.1V 15C - 20C Li-Poly battery
Kit Only. Servo shown is for illustrating purposes only. This
Model#E013D DOES NOT
include servos, motor, or radio gear.
Kit Only. Servo shown is for illustrating purposes only. This
Model#E013D DOES NOT include servos, motor, or radio gear.
Kit Only. Servo shown is for illustrating purposes only. This
Model#E013D DOES NOT include servos, motor, or radio gear.
Kit Only. Electronics shown is for illustrating purposes only. This
Model#E013D DOES NOT include servos, motor, or radio gear.
Feature:
CCPM
Hold Rotation System
Tail Belt Drive System
High Efficiency Blade
High Efficiency Tail Blade
Rear Tail Servo Stand
Super Iron Main Shaft
High Rigidity Aluminum Tail Boom
Super Iron Landing Skids
High Strength Carbon Fiber Tail Boom Support Set
Specification:
Main blade diameter: 680mm (26.8")
Tail blade diameter: 130mm (5.12")
Length: 650mm (25.6")
Height: 230mm (9")
Flying Weight: About 670g
Rotate ratio: 12:140/110:22
Tail rotor drive Belt System
Package Include:
Helicopter ARF Kit
English Manual
Additional Requirement:
Four 8g Servos or equivalent
6 channel receiver and crystal
6 channel CCPM transmitter
28mm diameter brushless outrunner motor with a Kv of 3800 RPM/V and a 2.3mm
shaft
